KAWMET W6 (10.1 kW) ECO Fireplace Insert
KAWMET W6 (10.1 kW) ECO is a wood-burning fireplace insert from the Polish foundry KAWMET with a nominal output of 10.1 kW, sized for rooms of up to 100 m² (up to 250 m³). A flat front pane shows the firebed head-on. Thermal efficiency is 74.6 %, energy class A.
The entire combustion chamber weighing 95 kg is an iron casting — with no welded sheet that would warp over time under repeated heating and cooling. Cast iron works like a storage battery: it absorbs heat while the fire burns and gives it back gradually once the flames have died down. A vermiculite baffle turns the flue gases back above the firebed, lengthening their path and raising the combustion temperature.
Key features — W6
- Nominal output 10.1 kW — heats up to 100 m² (250 m³)
- Thermal efficiency 74.6 %, energy class A
- Clean glass system — air guided along the pane limits soot build-up
- Damper for regulating the chimney draught
- Back plate protecting the rear of the body from burning through
- Decorative log guard keeping the wood in place
- Air supply adjusted through the ash pan
- Meets Ecodesign requirements
- Combustion air taken from the room — no factory external air spigot
- Flue outlet top, flue pipe Ø180 mm; door opens to the left
- Maximum log length 470 mm
- Dimensions (W × H × D): 685 × 515 × 380 mm, weight 95 kg
- Material: cast iron. Made in Poland — 5-year warranty
The KAWMET Standard ECO range and Ecodesign requirements
The KAWMET Standard ECO inserts were developed to meet the EU Ecodesign requirements for solid fuel heating appliances. In practice this means a seasonal efficiency above 65 % and limits on particulate, carbon monoxide and hydrocarbon emissions. An insert that fails to meet these standards can no longer be legally placed on the market — and many Polish municipalities additionally enforce clean-air resolutions requiring older appliances to be replaced.
The model reaches these figures thanks to its secondary combustion system: secondary air fed above the firebed burns off gases that escaped up the flue in older designs. The effect is twofold — lower emissions and more heat from the same amount of wood.
Is 10.1 kW enough to heat my house?
The model is rated for roughly 100 m² with standard insulation and a ceiling height of 2.5–2.7 m. In a poorly insulated building, one with large glazed areas or a higher ceiling, the real figure will be lower. Oversizing is harmful too, however: for most of the season the appliance then runs on a low flame, which soots up the glass and the flue faster.
Does it need an external air supply?
This model has no factory external air spigot — combustion air is taken from the room. In an airtight house with mechanical ventilation this means a separate air inlet to the room has to be provided; agree the solution with your installer before buying. If an external air supply is a requirement for you, choose a model that lists this function in its specifications.
What surround and chimney does the insert require?
The insert connects to a flue of Ø180 mm, with the outlet at the top. The body measures 685 × 515 × 380 mm (W × H × D) and weighs 95 kg — the surround is designed with allowance for expansion and convection ducts, and the floor beneath the fireplace has to carry that weight. Required clearances to combustible materials and the ventilation rules for the surround are given in the manufacturer's manual, available in the documents section on this page.
What fuel should be used?
The fuel is seasoned hardwood with a moisture content of up to 20 %. The maximum log length is 470 mm. Wet wood gives noticeably less heat, smokes up the glass and speeds up soot deposits in the flue. Chipboard, painted or impregnated timber and waste must not be burnt — they shorten the life of the cast iron and void the warranty.
KAWMET products carry a 5-year manufacturer's warranty. Your nearest representative will confirm availability and purchase terms.
